Product Description

Weighbeams • 40″ • WB5040-AWP

Wireless Weigh Beams, 5,000 lbs with TI-500 RF Indicator

The WB5040-AWP is Transcell's fully portable wireless weigh beam system, designed for livestock weighing, industrial floor applications, and any situation where a permanent floor scale is impractical. The system includes two 40 in carbon steel weigh beams and a TI-500 RF indicator, connected via Bluetooth 5.0 for a completely cable-free weighing experience. Total system capacity is 5,000 lbs at 1 lb readability.

Setup takes minutes. Place the two beams parallel on any flat surface, power on the indicator, and weigh. Each beam has built-in carry handles and an integrated battery pack for true portability. The beams are fully water resistant and the system is built to operate in tough environments from livestock chutes to warehouse docks to outdoor job sites.

The TI-500 RF indicator is NTEP certified, battery powered, and equipped with auto weight capture for unstable and live loads, an internal clock for time and date stamping, and RS-232 output for data transfer to printers, computers, and WMS platforms. Backed by a 2-year warranty, with US-based support from Transcell's facility in Buffalo Grove, IL since 1981.

5,000 lbs
Total Capacity
2,500 lbs per beam

BT 5.0
Wireless Connection
100 m range, Class I

3 in
Beam Height
3.7 in overall height

200 %
Overload Protection
10,000 lbs system total

2 yr
Warranty
US-based support

Built for Portability and Performance

100% Wireless via Bluetooth 5.0
Bluetooth signal transfer between the weigh beams and the TI-500 RF indicator. No cables between beams or indicator. Class I module with 100 m range.

Lightweight and Portable
Each weigh beam is fitted with a built-in carry handle for easy transport. The entire system sets up in minutes with no tools required.

Low-Profile: 3.7 in Overall Height
Under 3 in beam height. Slides easily under cattle chutes, conveyors, tanks, hoppers, and large objects without modification.

Auto Weight Capture
Designed for unstable and live loads. Auto weight capture locks in a stable reading even when the load is moving, ideal for livestock weighing.

Water Resistant Beams
Beams are fully water resistant for outdoor and wet environments. Non-skid hard rubber feet provide extra grip and shock dispersal. Indicator is rated IP54 (splash resistant).

Integrated Battery in Each Beam
4-C batteries in each beam, 4-AA batteries in the indicator. Auto shutoff extends battery life. AC adapter operation also supported.

TI-500 RF Wireless Indicator

Transcell TI-500 RF NTEP certified wireless weighing indicator

NTEP certified. Aluminum/ABS NEMA 12 enclosure with 0.8 in 6-digit LCD display with LED backlight. Battery powered via 4-AA alkaline batteries. Bluetooth 5.0 wireless connection to beams. Standard RS-232 with optional Bluetooth module for host communication.

Key Specifications
EnclosureAluminum / ABS NEMA 12
Display0.8″ 6-digit LCD
Max Divisions50,000
NTEP Divisions10,000
Serial OutputRS-232 (standard)
NTEP CC12-002

Built-In Functions
Auto Weight CaptureUnstable / Live loads
Peak HoldIncluded
CheckweighingIncluded
AccumulationIncluded
Time / DateInternal clock, RS-232 stamp
BluetoothOptional host module

Connect to Any System

Included
Bluetooth 5.0
Wireless link between beams and indicator, 100 m range

Standard
RS-232
Full duplex serial output for printers, computers, and WMS

Optional
Wi-Fi
802.11 b/g for wireless network and WMS integration

Optional
RS-485
Multi-drop network connection for multi-scale installations

Additional options include 16-bit analog output: 0-5 VDC active or 4-20 mA passive for direct PLC and process control integration.

Common Applications

Warehouse & Freight

Drums & Chemicals

Tanks & Hoppers

XL
Large & Oversized Objects

Livestock & Agriculture

Construction & Job Sites

Key Specifications

Specification WB5040-AWP
Total Capacity 5,000 lbs (2,500 lbs per beam)
Readability 1 lb
Beam Length 40 in (1,016 mm)
Bar Section Width 3.9 in (100 mm)
Beam Height 3 in (78 mm)
Overall Height 3.7 in (95 mm)
Foot Pad Diameter 3 in (76.2 mm)
Beam Construction Carbon steel, high grade epoxy paint
Load Cell Type NTEP approved alloy steel shear beam
Overload Protection 200% of rated capacity (10,000 lbs)
Wireless Bluetooth 5.0, Class I, 100 m range
Beam Power 4-C batteries per beam (AC adapter optional)
Indicator Power 4-AA batteries (AC adapter optional)
Accuracy ±0.04% to ±0.1% depending on installation
Operating Temperature 14°F to 104°F (-10°C to 40°C)
Net Weight 65 lbs
Shipping Weight 75 lbs
Indicator TI-500 RF (NEMA 12, 50,000 divisions, RS-232)
Warranty 2 years

NTEP Certified
Indicator NTEP certified at 10,000 divisions. Load cells NTEP approved alloy steel shear beam construction.

2-Year Warranty
2 years on the complete system. US-based support from Buffalo Grove, IL since 1981.

Free Ground Shipping
Free to the contiguous 48 states. Ships within 2 to 3 business days.

Shipping note: Free ground shipping to contiguous 48 states only. Alaska and Hawaii excluded. Illinois residents subject to 8% sales tax.

SKU: P104930060 Categories: , ,

Dimensions / 3D Drawings

Note: You may need a software that can open/view STEP files.

Interchangeable

Ask us about our OEM and Dealer Pricing

Contact Us
Close-up view of clevis joint

Insights

Accurate and Reliable Force Feedback Using Load Pins

Read More

Industries

Experience to Solve Your Problems

Proven product quality and performance combine with our engineering experience to solve force measurement challenges in any industry that needs load cells and related force sensing equipment.